4.1Searching broadcasting services 31
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Select the tuner that is connected to the motorized an-
tennaat the Tuner Select option.
3. Set the DiSEqC Command Mode to User.
4. Select the Goto option at the Motor Control menu. Then
theantenna will turn toward your selected satellite with
theposition data that the digital receiver has.
5. If the receiving quality, which is displayed on the right
bottomon the screen, is not good, tune the antenna finely
with the options of the Movement menu. If you select
the2(E) movement option, the antenna will move to the
east by two degrees. At this time you had better check
the receiving quality of every transponder and choose
the best one at the Transponder(or Frequency) option.
Itwill be helpful to your fine tuning.
6. Finallyselect the Store option at the Motor Control menu
to save the tuned position when the receiving quality
hasturned good.
There are more motor control options for installers, but this
manual does not describe them. If you are an installer, refer
themto the manual for the STAB rotor.
4.1.3 ConfiguringUSALS settingsUSALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is
no longer required to manually searchand store every satel-
lite position. Just by pointing to a known satellite position is
enough. This position will act as the central point. The USALS
willthen calculate positions of visible satellites.