52 ListingServices
If you have a RS-232 cable (9 pin D-sub
cable), plug one end of the cable into the
RS-232 port on the digital receiver,and the
other end into the matching port on your
computer.
If you have a USB cable, plug one end of
thecable into the USB port on the digital re-
ceiver,and the other end into the matching
porton your computer.
Turnoff the digital receiver if it is on, and then Run Vega. To
import the channel data from the digital receier,perform the
followingsteps:
1. If you have connected with a USB cable,select the Mode
>USBmenu; otherwise if you have done with a RS-232
cable,select the Mode >Serial menu.
2. Select the Up & Down >Upload from STB menu.
3. A box appears asking for your confirmation. Press the
Uploadbutton on it.
4. Turn on the digital receiver. Data transfer will start as
soonas it is turned on.
Of course, you can open a std file instead of importing the
channeldata from the digital receiver if you have ones. If you
have finished your work, you have to perform the following
stepsto export the channel data to the digital receiver.
1. Select the Up & Down >Download to STB menu.