12. Display and Keys
12.1 Front Panel Layout
The front panel consists of several elements for monitoring and operation of the UPS. Panel components are shown in the illustration below:
HARDWARE RUN/STOP SWITCH 
LCD TOUCH SCREEN
DISPLAY CONTRAST ADJUSTMENT
(MIDDLE LEFT SIDE OF PANEL)
96% | 100% |
| INV |
| 12:35 PM |
HOME | USR |
|
|
|
|
Main | Monitor | Settings | Records | ||
| 1600XP |
|
| ||
|
|
| |||
|
|
| UPS Controls | ||
UPS Serial Number |
|
|
| ||
20080112345 |
|
|
| RUN | |
|
|
|
|
| |
UPS Typeform |
|
|
|
| |
UXPB2B100C6 |
|
|
|
| |
|
|
|
| STOP | |
DVCOH |
| ASYNASYN |
| ||
1600XP |
|
| |||
Warning | A/C Input | ||||
|
|
| DISPLAY RESET SWITCH | ||
STATUS LEDS (PAGE 25) |
|
| (LOWER RIGHT SIDE OF PANEL) | ||
12.2 Display Manual Controls
Hardware Run/Stop Switch – Pressing the contact switch momentarily will toggle the UPS state between RUN and Bypass. For Instance, while the UPS is in RUN mode, pressing the switch will change the mode to Bypass. Pressing the switch again will switch the UPS back to RUN mode.
Display Reset Switch – When necessary, the touchscreen display can be reset by using a thin probe, such as a paper clip, to press the display reset switch.
Display Contrast Adjustment – The display is shipped with the display adjusted for optimum visibility. If necessary use a trimmer adjustment tool to fine tune the display contrast for improved visibility.
22 | 1600XP Series Installation and Operation Manual |
