Toshiba operation manual Appendix a 1600XP Specifications, Standard Model 3.6 10 kva

Appendix A: 1600XP Specifications

Standard Model: 3.6 – 10 kva

Unit (Capacity)

3.6kVA (3.1 kW) 1

6 kVA (5.1 kW) 1

8 kVA (6.8 kW) 1

10 kVA (8.5 kW) 1

General

Topology			True On-Line
Certifications	ANSI C62.41 (IEEE 587), UL 1778, CUL, CE, FCC Class A , NEC (NFPS-70), NEMA/
	PE1-1993, OSHA, ASME, ISO 9001, ISO 14001:2004 , RoHS Compliant
Input Characteristics
Input Voltage1			Single-phase, 208/240 Vac, +10% to -30%1
Input Frequency			45 – 65 Hz (auto-sensing)
Input Capacity	3.6 kVA		6 kVA		8.0 kVA		10 kVA
Input /(Max Input) Current @208V	17.9 (18.7) A		29.8 (31.1) A		38.9 (40.5) A		48.6 (50.2) A
Input/(Max. Input) Current @240V	15.5 (16.2) A		25.9 (27.0) A		33.7 (35.1) A		42.1 (43.5) A
Input Power Factor			0.98 Typical, 0.95 Minimum@ 100% Load
Current THD (linear load)			< 5% total harmonic distortion
Internal AC Input Breaker Rating	30 A/277 V		50 A/277 V		60 A/277 V		63 A/277 V
Battery Characteristics
Battery Type		Valve Regulated Lead Acid, Flame Retardant
Backup time, fully charged @ 0.7	8 min.2		8 min.2		7 min.2		7 min.2
power factor, 77 °F
Backup time, fully charged @ 0.85	7 min.2		7 min.2		7 min.2		5 min.2
power factor, 77 °F
Recharge Time		24 hr. (full), 12 hr. (90%) for internal batteries only3
Battery Voltage (Nominal)	144 Vdc		216 Vdc			288 Vdc
Output Characteristics
Output Voltage			Single-phase, 240/208/120 V
Output Voltage Regulation				= ± 3%
Output Frequency	±0.5 Hz/1.0 Hz/1.5 Hz (factory or authorized service center selectable only)
AUTO/MAN Frequency		Factory or authorized service center selectable only
Voltage THD		< 3% for linear load; < 6% for non-linear load
Common-Mode Noise			< 0.5 Vrms
Rated Load Power Factor1			0.85 (0.6 – 1.0) lagging
Efficiency (ac-dc-ac)		≥83%				>85%
Voltage Transient			< ±8% (Load of 0 – 100 %)
Voltage Transient Recovery			50 ms to within 2% of nominal
Rated Output Current (rms)	15 A		25 A		33.3 A		41.6 A
Max Peak Output Current	45 A		75 A		100 A		125 A
Inverter Overload Capacity			125% for 30 sec./150% for 10 sec.
Bypass Overload Capacity			125% for 10 min./1000% for 1 cycle
Crest Factor				3.0

1.Input/output figures rated for 240 volts unless otherwise stated. Output ratings given for 0.85PF are only valid when the input voltage is greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.

2.Battery backup time may vary depending on the operating conditions and ambient temperature at the installation site.

3.An initial charge time of 24 hrs. is necessary to obtain proper battery performance level before unit is placed in operation.

1600XP Series Installation and Operation Manual A1