52 | Getting Started | |
Setting up your computer | ||
|
|
|
Connecting a mouse
You may want to use a mouse or trackball instead of the computer’s
The TouchPad® can remain operable, even if you connect a secondary pointing device to the computer. For more information, see “Toshiba Hardware Setup” on page 172.
Using a USB mouse
1Connect the mouse cable to the USB port.
2Install the vendor supplied software that came with the mouse, if needed.
Using a PS/2 mouse
The system cannot detect a PS/2 mouse if you connect it after starting the computer.
NOTE: If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on.
CAUTION: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage.
1Attach the PS/2 mouse cable to the PS/2 port.
2Refer to your mouse documentation for configuration steps.