86 | Learning the Basics | |
Using your CD or DVD drive | ||
|
|
|
Playing a DVD
This manual has a separate chapter on using the WinDVDTM software application for playing DVDs. For information, see “WinDVD 2000” on page 175.
Removing a disc
Removing a disc with the computer on
1Press the eject button.
CAUTION: Never press the eject button while the computer is accessing the
If the disc is still spinning when you open the disc tray, wait for it to stop before you remove it.
2Pull the disc tray until it is fully open, remove the disc, and place it in its protective cover.
3Close the disc tray.
Removing a disc with the computer off
1Insert a slender object, such as a straightened paper clip, into the manual eject button hole.
CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
2Pull the disc tray until it is fully open, remove the disc, and place it in its protective cover.
3Close the disc tray.