7

7) VESAMounting Pattern

50" TV.

 

 

VESA Mounting Pattern

TVSize

HolePattern(HxV)

ScrewSize

32"

200mm x 200mm

M6

40"

2OOmm x 2OOmm

M6

50"

4OOmm x 2OOmm

M8

Removing the Pedestal Stand

1)Carefully lay the front of the unit face down on a fiat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2)Remove the stand screws shown in the diagram below. This will allow removal of the pedestal stand.

3)Once you have removed the screws holding the

pedestal stand in place, remove the pedestal stand from the TV.

32" TV. VESAMountingPattern

Two stand screws

Hook for attaching

 

the strap

 

 

(as short

as possible

(SampleIllustration)

Four stand screws

the strap

(as short as possible)

(SampleIllustration)

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, )illar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

40"TV.

VESA Mounting Pattern

I• Hookfor attaching

Four stand screws the strap

(as short as possible)

(SampleIllustration)

Page 7
Image 7
Toshiba 50L2400U, 40L2400U manual 50 TV