Troubleshooting 99
5bund problems
Noisy picture.
If you arewatching ananalog channel (off-air broadcast or Cable
TV), you canset theDNR feature toreduce visible interference in
the TV picture, see "Digital Noise Reduction (DNR)" on page 96
Video Input Selection problems
If the Input Selection window does not appear when you press
INPUT on the remote control orTV,press INPUT a second time.
This will cause a change to the next video input source and display
the Input Selection window.
Poor display color or no color.
The station may behaving broadcast difficulties. Try another
channel.
Adjust the Tint and/or Color, see "Adjusting the picture quality" on
page 65
Poor composite picture.
If the TV is connected to anexternal A/V device (e.g. DVD player,
video game system, set-top box, etc.) try using a ColorStream TM or
HDMt _ video connection instead.
Picture and sound are out ofsync.
As with all products that contain adigital display, this may occur in
rare instances, when viewing certain content (e.g. television
broadcasts, video games, DVDs). The cause may include, without
limitation, video processing within the TV, video processing in an
attached gaming system, and video processing or different
compression rates used by broadcasters in their programlning.
Try the following:
o***Ifthe TV is connected to an A!V receiver that has a
progralmnable audio delay feature, use this feature to help
synchronize the sound tothe picture.
o***Ifthe problem occurs only on certain TV channels, inform your
local broadcast, cable, or satellite provider.
o:* Turn off and unplug the TV from theAC wall outlet for a few
seconds and plug it back in.
Soundproblems
Check the antenna/cable connections, see "Connecting aVCR,
antenna, cable TV, or camcorder" on page 24
The station may behaving broadcast difficulties. Try another
channel.
The sound may be muted. Press the VOL (+) button.