Toshiba 40L2400U manual Storingchannelsinmemoryoptional, AutoTuning, SettingupyourTV, Auto Tuni

4SettingupyourTV

Auto Tuni_

3Open the Channel Tuning menu, highlight ANT/CABLE In, and then press the ENTER button.

(Sample hm_tge) Channel tuning menu - Input configuration selection

4Press the A/T (arrow) buttons to select the input source (Cable or Antenna), and then press the ENTER button to save your new settings.

Storingchannelsinmemory(optional)

To make sure your TV stops only on the channels you want when you press the A/T (arrow) buttons on the remote control or the control panel, store those channels in the TV's memory.

AutoTuning

You can set up the TV to detect all active channels in your area and store them in its memory. Then you can manually add or erase individual channels from memory.

NOTE o:÷ YoumustsetuptheANT/GABLEinputsourcebefore

programmingchannelsSee"ANT/CABLEIN"onpage43..

•:- Theautomaticchannelprogrammingprocesswill erase channelsthatwerepreviouslyprogrammedintotheTV's memory.

o:- TotunetheTVtoachannelnotprogrammedinthechannel memory,youmustusetheChannel Number buttonsonthe remotecontrol.

•:- ProgrammingchannelswhentheANT/CABLEinputis configuredfor Cablewill takesubstantiallylongerthanwhenthe antennainputis configuredforAntennaThisisnormal;. however,oncechannelprogrammingis finished,youshouldnot haveto repeattheprogrammingprocessagainunlessyourCable TVservicelineupchangessignificantly.