Toshiba 50L2400U, 40L2400U NoSignalPowerDown, UsingHDMI CEC, Availableremotecontrolkeyfunctions

SettingupyourTV

NoSignalPowerDown

The TV will automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Offfor the following purposes:

o.** Low signal strength of analog channel (no signal detection)

o.** Only Audio L/R is connected to external input to listen to music through the TV speakers.

To change the no signal power down setting:

1From the Options menu, highlight Power Management, and then press the ENTER button.

2Highlight No Signal Power Down, and then press the ENTER button.

3Press the •/• (arrow) buttons to highlight the item you want to change, and press the 4/_ (arrow) buttons to select On or Off.

NOTE	o:. Defaultsettingforthisfeatureis On.
	o:÷ Awarningmessagewillappear1minutebeforetheTVturnsoff.

UsingHDMI® CEC

This is a new feature that uses CEC technology and allows you to control Toshiba HDMI ® CEC compatible devices from the TV remote via HDMI ® (see "HDMI(R)CEC connection" on page 29) When Enable HDMI CEC Control in the HDMI CEC Control

Setup menu is set to On (see "Setting up HDMI(R)CEC" on page 90), the HDMI ® CEC functions described below will be enabled.

HDIVII® CECplaybackdevice(Blu-rayTM/DVDplayer,etc.)control

With your TV's remote control, or using the HDMI ® CEC Player Control menu, you can control the connected HDMt _ CEC playback device you are watching.

Availableremotecontrolkeyfunctions

Button."Description."

PLAYBeginplayback

STOPStopplayback

PAUSE Pausethepictureduringplayorrecordmode

SKIPForward SkipForward

SKIPReverse Skipbackward