Toshiba 50L2400U, 40L2400U manual SwitchingbetweentwochannelsusingChannelReturn

	SettingupyourTV 57
	Favorites browser
NOTE	Ifadigitalchannelis notprogrammed,eitherthroughtheautomatic
	channelscanortheChanneladdfunction,see"AutoTuning"onpage
	44,youwill havetotunetheRFchannelusingtheChannelNumbers
	andthe(Basil 100) buttonontheremotecontrol.

SwitchingbetweentwochannelsusingChannelReturn

The Channel Return feature allows you to switch between two channels without entering an actual channel number each time.

1 Select the first channel you want to view.

2Select a second channel using the Channel Number buttons (and the (Dash 100) button if selecting a digital channel).

3Press the CH RTN button on the remote control. The previous

channel will display. Each time you press the CH RTN button, the TV will switch back and forth between the last two channels

that were tuned.

NOTE IfyoupresstheCHRTNbuttonfromanon-antennainput,theTV will returntothelast-viewedinput.

SwitchingbetweentwochannelsusingSurfLockTM

The SurfLock TM feature temporarily "memorizes" one channel to the CH RTN button, so you can return to that channel quickly from any other channel by pressing the CH RTN button.

To memorize a channel to the CH RTN button:

1Tune the TV to the channel you wish to program into the CH RTN button.

2Press and hold the CH RTN button for a few seconds until the message "Memorized" appears on the screen. The channel has been prograimned to the CH RTN button.

3You can then change channels repeatedly, and when you press the CH RTN button, the memorized channel will be tuned.

The TV will return to the memorized channel one time only. Once you press the CH RTN button and then change channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs.