SettingupyourTV 45

To program channels automatically:

1Configure the antenna input source, if you have not already done so, see "ANT/CABLE IN" on page 43.

2Press the MENU button and open the Installation menu.

3Highlight Channel Tuning, and then press the ENTER button.

(Sample Image) Setup metal - Instalh_ttion selection

4Highlight Auto Tuning, and then press the ENTER button to open the Channel Program menu to begin channel progralmning.

(Sample Image) Installation metal - Channel selection

The TV will automatically cycle through all the antenna/cable channels, and store all active channels in the channel memory. While the TV is cycling through the channels, the message "Scanning channels, please wait" appears.

To cancel channel progralmning, press the EXIT button on the remote control or highlight Cancel in the on-screen display, and then press the ENTER button.

When channel programlning is complete, press the CH

/ • (arrow) buttons to view the programlned channels.

Page 45
Image 45
Toshiba 50L2400U, 40L2400U manual Sample Image Setup metal Instalhttion selection