105
Using the TV’s Advanced Features
Setting up the Network
13 Press the ◄/►(arrow) buttons to select Yes, and then press
the OK button.
Settings are not saved if the BACK button is pressed before Done is
selected.
Wireless Information
The settings congured in Wireless Setup can be conrmed.
1 Press the MENU button.
2 Select Network > Network Setup > Wireless Setup, and then
press the OK button.
3 Press the ▲/▼ (arrow) buttons to select Wireless Information
and press the OK button.
4 Press the RED button to check the availability of surrounding
APs.
A Wireless Information screen appears when a connection is
successfully made.
Item: Description:
Status The message, “Connected” appears when the TV is
connected to the AP
The message, “Disconnected” appears when the TV is
disconnected from the AP
Signal Connection signal strength with the AP (STRONG/
MEDIUM/WEAK)
Speed The link speed with the AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel The channel in use (1-165)
Network name SSID set
Authentication Authentication set
Encryption Encryption set
Security key Security Key set
AP MAC address The AP’s MAC address appears when the TV is
connected to the AP
TV MAC address The TV’s MAC address
DHCP The message, “Enabled” appears when you use DHCP.
The message, “Disabled” appears when you do not use
DHCP.
IP address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default Gateway Default GATEWAY’s address
DNS DNS’s address