Advanced Network Setup IP Address Setup | Toshiba 65L5400UC instruction

106 Using the TV’s Advanced Features

Setting up the Network

Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. We recommend that the Encryption setting is changed to AES (Under manual setup).

When manually setting the IP Address, set Auto Setup to Off.

Advanced Network Setup

IP Address Setup

The settings in Auto Setup are linked to those selected in the DNS Setup menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu will also be set to On.

Auto Setup:

1Press the MENU button.

2Select Network > Network Setup > Advanced Network Setup and press the OK button.

3Press the ▲/▼ (arrow) buttons to select IPAddress Setup and then press the OK button.

4Press the ▲/▼ (arrow) buttons to select Auto Setup and press the OK button.

5Press the ▲/▼ (arrow) button to select On.

Other items are grayed out when Auto Setup is set to On.

Manual Setup:

1Press the MENU button.

2Select Network > Network Setup > Advanced Network Setup and press the OK button.

3Press the ▲/▼ (arrow) buttons to select IPAddress Setup and then press the OK button.

4Press the ▲/▼ (arrow) buttons to select Auto Setup and press the OK button.

5Press the ▲/▼ (arrow) button to select Off.

6Press the ▲/▼ (arrow) button to select IPAddress.

Image 106

Toshiba 65L5400UC Advanced Network Setup IP Address Setup, When manually setting the IP Address, set Auto Setup to Off

Contents

IntegratedHighDefinition LEDTelevisionUser’sGuide Safety Precautions Child Safety Important Safety Instructions Care Choosing a location for your LED TV 58 TV Important notes about your TV Copyright Contents Setting up your TV Using the Remote ControlMenu Layout and Navigation Resetting Factory Defaults Setting up your TV Setting the sleep timer No Signal Power Down Using Hdmi CEC Adjusting the audio quality DTS TruSurroundUsing the input lock feature MediaShare Videos, Music, and Photos Wireless LAN and your Health Using the Hdmi settings feature Hdmi 12, or 3 RGB RangeColor Temperature Using the TV in a wireless LAN environment...100 Troubleshooting USB 129 Safety icons Introduction Features 1920 x 1080 output resolution Energy Star qualified Overview of installation, setup, and use Read Important notes about your TV on TV front and side panel controls and connections TV back panel connections Sample Illustration 58/65L5400UC Back panel connections Introduction Coaxial F-type cable Overview of cable typesSample Illustration Coaxial cable Hdmi cable with Hdmi Logo Standard A/V cables red/white/yellowComponent video cables red/green/blue Hdmi cables provide the best audio and picture quality About the connection illustrations Optical audio cableLAN cable Sample Illustration Optical audio cable To view the antenna or cable signal From satellite dish Connecting an Hdmi or DVI device to the Hdmi input  Sample Illustration 58/65L5400UC-HDMIconnections To view the Hdmi device video Hdmi CEC connection Sample Illustration 58/65L5400UC-DVI connections With the Hdmi Logo Connecting a digital audio system Connecting a computer Connection to the TV’s Hdmi terminal Connecting to a home network Edges of the picture may be hidden Items needed Standard LAN cables Router with a hub Item Description Modem DSL or cable Wireless LAN access point Sample Illustration Installing the batteries Installing batteriesSample Illustration Removing the remote back cover Remote control effective range Remote control effective range Learning about the remote control Sample Illustration Remote control overview Navigating the menu system on Learning about the remote control Display Settings Opens the Display Settings menu Picture Picture ModeReset Store Timers Sleep Timer Setup Hdmi CEC PlayerOn / Off Parental PIN Setup Maximum of 12 hours GameTimer Auto Demo Opens Auto Demo menu System InformationSample Image Navigating the menu system Setting up your TV Initial Setup Menu language Installation setup selectionSample Image Installation Setup selection Sample Image Selecting the menu language Auto Tuning Storing channels in memory optional Sample Image Setup menu Installation selection Sample Image Installation menu Channel selection Analog channel Manual TuningSetting channel skip Digital channel Setting the AV input mode Setting the time zone Resetting Factory Defaults Viewing the system status Selecting the video input source Sample Image Input Selection screen Sample Illustration Hdmi setting pop-up window Selecting the video input source Labeling the video input sources Sample Image Input Labeling screen Labeling the video input sources Sample Image Input selection screens Tuning to a specific channel programmed or unprogrammed Tuning to the next programmed channelSwitching between two channels using Channel Return Switching between two channels using SurfLock Switching between two channels using SurfLock Selecting the picture size Sample Illustration Picture size -Full FullTheaterWide Sample Illustration Picture size TheaterWide Native Mode Sample Illustration Picture size Native Sample Illustration Picture size NormalDot by Dot Sample Illustration Picture size Normal Sample Image Picture menu Theater Settings selection Scrolling the TheaterWideTM picture TheaterWide 2 and 3 only This feature is available when Auto Aspect is set to On Using the Auto Aspect featureUsing the 43 Stretch Normal Letter Box TheaterWide Full Adjusting the picture Adjusting the picture quality Sample Image Picture menu Mode selection Base closed captions Using closed captionsSample Illustration Viewing captions Digital CC settings Sample Illustration Captions text Using the Closed caption button Muting the sound Adjusting the audioUsing the Digital Audio Selection Sample Image Levels of mute Selecting stereo/SAP broadcasts If the sound is noisy, select Mono to reduce the noise DTS TruSurround Adjusting the audio qualitySound Mode Stable Sound Enter a new PIN code Using the Dolby Digital Dynamic Range Control featureSelecting the PIN code Forgotten PIN code Using the input lock feature Locking channels Using the GameTimer Using the panel lock feature Sample Illustration Locks menu Panel Lock selection Using MediaShare with a USB device or a Media Server MediaShare Videos, Music, and Photos Non-supported characters will be replaced with a square To open the MediaShare Auto Start functionSample Image MediaShare open screen Multi View Sample Image MediaShare setup screenViewing photo files Viewer will open even if there are no photo or music files Single view Picture size functions are disabledSlide show Playing music files Sample Image MediaShare music list Viewing photo files and playing music files at the same time Playing video files MediaShare Videos,ToMusic,set the repeatand Phmotosde To register your TV to a DivX account DivXTo unregister your device Setting the sleep timer To playback DivX HD content Using Hdmi CEC No Signal Power DownDefault setting for this feature is On Available remote control key functions Hdmi CEC Player Control menu functions Hdmi CEC input source selection Volume and Mute controls of Audio ReceiverSetup Menu Accesses the setup menu of a selected device CEC Player Control menu disappears Setting up Hdmi CEC Other Hdmi CEC functions Hdmi Information Display Using the Hdmi settings featureHdmi 12, or 3 RGB Range Limited Displaying TV status information Sample Illustration Info banner Understanding the last mode memory feature Using the TV’s Advanced Features Base Color Adjustment Static Gamma Color TemperatureCool Blueish Medium Neutral Warm Reddish DynaLightTM Cinema ModeDynamic Contrast DNR Dynamic Noise Reduction This feature may not work properly depending on the contentNoise Reduction Edge Enhancer Using your home network When using a Wireless network connection Setting up the Network Wireless Setup Easy Setup using PBC Push button configuration Easy Setup using PIN Personal Identification Number Assisted Setup Manual Setup This item is grayed out when Encryption is set to None Wireless Information When manually setting the IP Address, set Auto Setup to Off Advanced Network Setup IP Address SetupOther items are grayed out when Auto Setup is set to On DNS Setup IP address field numbers must be between 0 Network Connection Test MAC AddressDNS address field numbers must be between 0 Shift Sample Illustration Software keyboardText entry field Return Enter text using the software keyboard An Internet connection is required If the network is not available, a warning message appears Using the TV Application Services features Watching movies with Netflix YouTubeTM Troubleshooting General troubleshooting Picture problems Onscreen Demo Pop-up Sound problems Noisy picture Remote control problems Channel tuning problems Network problems Closed caption problemsHdmi problems No Hdmi CEC operation No network connection Media server name is not displayed Wireless network problems MediaShare problems If the problem persists after trying the solutions Specifications Power source Speaker type Digital audio output Wireless connectionDimensions with stand Ethernet Weight mass Supplied accessoriesOperating conditions 800 x 60.317 Hz 37.879 kHz 40.000 MHz Hdmi signal formats640 x 59.940 Hz 31.469 kHz 25.175MHz 1024 x 60.004 Hz 48.363 kHz 65.000 MHz DNR Color Temperature Using closed captions 66Cinema Mode Noise Reduction Choosing a location for your About the connection illustrations Exhibit C Index 135 Features 18, 20 FullFeatures Overview of installation, setup, and use Standard A/V cables red/white/ yellow Using 75 picture Adjusting quality 67 picture size If the problem persists after trying the solutionsUsing the Hdmi settings feature Hdmi 1or 2 RGB Range Navigating the menu system Using Media Player with a USB device Selecting the PIN code 73 SpecificationsSound problems Installing batteries Base Color Adjustment Labeling