74 Setting up your TV

Selecting the PIN code

StableSoundTM cannot be used at the same time as DTS TruSurroundTM.
The feature is greyed out until DTS TruSurroundTM is turned Off.

Using the Dolby® Digital Dynamic Range Control feature

You can further compress Dolby® Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby® Digital Dynamic Range Control:
1 Press the MENU button and open the Sound menu.
2 Highlight Dynamic Range Control, and then press the OK button.
3 Press the ▲/▼(arrow) buttons to select On, and then press the OK
button.
v This feature is available when the TV is tuned to a digital RF channel
or an HDMI® input with the Dolby® Digital signal.
Selecting the PIN code
A PIN code is necessary for some menus.
v The Parental Control and Locks menu is grayed out if no PIN has
been set.

Enter a new PIN code

1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the OK button.
3 Use the number buttons to enter a 4-digit number. Conrm the code.

Forgotten PIN code

While the PIN code entering screen is displayed, press the INFO
button four times within ve seconds. The PIN code will be cleared
and you can enter a new PIN code.

Changing or deleting your PIN code

1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the OK button.
3 Use the number button to enter a 4-digit number.
4 Select Change PIN or Delete PIN. Press the OK button.