TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:

1.Save your work.

2.Turn the computer’s power off - ensure that the Power indicator is off.

3.Remove all cables and peripherals that are connected to the computer.

4.Close the display panel and turn the computer upside down.

5. Slide the battery lock (1) into its (

) position to disengage the battery

pack.

 

6.Slide and hold the battery release latch (2) and then remove the battery pack from the computer (3).

Battery release latch

Battery pack

Battery lock

Releasing the battery pack

Installing the battery pack

To install a battery pack, follow the steps as detailed below:

Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.

1.Insert the battery pack as far as it will go into the computer (1).

2.Ensure that the battery pack is securely in place and the battery lock (2) is in its ( ) position.

Battery pack

Battery lock

Securing the battery pack

3. Turn your computer over.

User’s Manual

6-9