TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Problem

Procedure

Cannot write correctly

If you have trouble writing, make sure you are

 

observing the following precautions:

 

■ Use only media recommended by TOSHIBA.

 

■ Do not use the mouse or keyboard during

 

writing.

 

■ Use only the software supplied with the

 

computer for recording.

 

■ Do not run or start other software during

 

writing.

 

■ Do not jar the computer during writing.

 

■ Do not connect/disconnect external devices

 

or install/remove internal cards during writing.

 

If problems persist, contact your dealer.

 

 

DVD Super Multi drive

For more information, refer to Chapter 4, Operating Basics.

Problem

Procedure

You cannot access a

Make sure the drive’s disc tray is securely

CD/DVD in the drive

closed.

 

Press gently until it clicks into place.

 

 

 

Open the disc tray and make sure the CD/DVD is

 

properly seated. It should lie flat with the label

 

facing up.

 

 

 

A foreign object in the disc tray could block laser

 

light from reading the CD/DVD. Make sure there

 

is no obstruction. Remove any foreign object.

 

 

 

Check whether the CD/DVD is dirty. If it is, wipe it

 

with a clean cloth dipped in water or a neutral

 

cleaner. Refer to the Media care section in

 

Chapter 4, for details on cleaning.

User’s Manual

8-11