TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Writing CDs on DVD-ROM&CD-R/RW drive

Depending on the type of drive installed, you may be able to write CDs. The DVD-ROM&CD-R/RW drive lets you write as well as read CD-ROMs. Observe the precautions in this section to ensure the best performance for writing CDs. For information on loading and unloading CDs refer to the Media care section.

■Refer to the Writable discs, Chapter 2 for the details about the types of writable CD/DVD discs.

■Do not turn off the power of the optical disc drive while the computer is accessing the drive. If you turn off the power, you may lose data.

When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a power plug socket. It is possible that, if data is written when powered by the battery pack, the write process may sometimes fail due to low battery power - in these instances data loss may occur.

Before writing or rewritingPlease observe the following points when you write or rewrite the data.

■We recommend the following manufacturers of CD-R and CD-RW media. Media quality can affect write or rewrite success rates.

CD-R:TAIYO YUDEN CO., LTD.MITSUBISHI CHEMICAL CORPORATIONRICOH Co., Ltd.Multi-Speed and High-Speed CD-RW:

MITSUBISHI CHEMICAL CORPORATION

RICOH Co., Ltd.

Ultra-Speed CD-RW:

MITSUBISHI CHEMICAL CORPORATION

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed.

■The actual number of rewrites to CD-RW media is affected by the quality of the disc and the way it is used.

■Be sure to connect the AC adaptor when you write or rewrite.■Be sure to close all other software programs except the writing software.

User’s Manual

4-15