TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Display the setting dialog box by one of the following two steps:

■Click the setting button ( ) for writing on the main toolbar in the Data CD/DVD mode.

■Select Setting for writing ->Data CD/DVD in the Setting menu.2.Mark the Verify written data check box.3.Select File Open or Full Compare mode.

4.Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

Media care

This section provides tips on protecting data stored on your CD’s, DVD’s and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it.

CD/DVDs

1.Store your CD’s and DVD’s in the containers they originally came in to protect them and keep them clean.

2.Do not bend the CD’s or DVD’s.

3.Do not write on, apply a sticker to, or otherwise mar the surface of the CD or DVD that contains the data.

4.Hold the CD or DVD by its outside edge or the edge on the center hole - any fingerprints on the surface of the disc can prevent the drive from properly reading data.

5.Do not expose the CD or DVD to direct sunlight, extreme heat or cold.

6.Do not place heavy objects on your CD’s or DVD’s.

7.If your CD’s or DVD’s become dusty or dirty, wipe them with a clean dry cloth from the center hole outwards - do not wipe in a circular direction. If necessary, you can use a cloth that has been lightly dampened in water or a neutral cleaner but you must not use benzine, thinner or any similar cleaning solution.

User’s Manual

4-23