Toshiba A9, Pro S200, SATELLITE PRO A150, TECRA S5 At the, At the, At the, At the, At the, At the, 1.Start up the computer, Fingerprint Authentication Procedure, Windows Logon via Fingerprint Authentication

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

3.At the User’s Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter your password field. Once this has been done, click Next.

4.At the Hints for Fingerprint Enrollment screen, confirm the message displayed and ensure that there is a check mark in the Run Interactive Tutorial box. Once this has been done, click Next.

5.At the Correct Swipe Procedure screen, confirm the message that is displayed and then click Next.

6.At the Scanning Practice screen, you are able to practice swiping your finger to ensure you use the correct method. Once you have finished practicing, click Next.

7.At the User’s Fingers screen, select the finger that you wish to enroll from the illustration and then click Next. On this screen please be aware that any previously enrolled fingerprints would have green check marks, while the fingerprint that you are about to enroll will have a red check mark. If any of the previously enrolled fingerprints is selected again, the latest information will be enrolled and any previous information over-written.

8.At Advanced Security screen, select whether you wish to enable the security function, and then click Next.

9.At Finalization screen, click Finish - this will complete the fingerprint registration process.

Windows Logon via Fingerprint Authentication

If required, you are also able to use fingerprint authentication in place of the usual Windows logon process using your username and password. This method is especially useful where there are many users using the same computer as it removes the need for actual user selection when the system is started.

Fingerprint Authentication Procedure1.Start up the computer.

2.At the Logon Authorization screen, choose any of the enrolled fingers and swipe the fingerprint on the sensor - if the authentication process is successful, the user will automatically be logged in to Windows.

If the fingerprint authentication process fails you will need to log into Windows using the appropriate username and password. In addition, you should use this manual login process if fingerprint authentication fails for three consecutive tries - a warning message will be displayed when authentication is not normal or is not successful within a fixed duration.

4-8 User’s Manual