TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Set the write-protect switch to the lock position, if you do not want to record data.

Formatting an SD/SDHC memory card

SD/SDHC memory cards are sold already formatted in conformity to specific standards. If you format the SD/SDHC Card again, be sure to format it with the TOSHIBA SD Memory Card Format utility, not with the format command provided within Windows.

In order to run the TOSHIBA SD Memory Card Format utility, click Start -> All Programs -> TOSHIBA -> Utilities -> SD Memory Card Format. Please note that the TOSHIBA SD Memory Card Format utility does not format the protected area of the SD/SDHC memory card - should you need to format all areas of the memory card, including the protected area, you will need to obtain an appropriate application that applies the copy protection system.

Memory Stick/Memory Stick PRO/Memory Stick PRO

Duo/MultiMediaCard

Set the write-protect switch to the lock position, if you do not want to record data.

Inserting memory media

The following instructions apply to all types of supported media devices.

1.Turn the memory media so that the contacts (metal areas) are face down.

2.Insert the media into the Bridge media slot on the side of the computer.

3.Press the media gently to ensure a firm connection is made.

Bridge media slot

Memory media

Inserting memory media

3-16

User’s Manual