Toshiba A9, Pro S200, SATELLITE PRO A150, TECRA S5 manual 160

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

DVD-ROM&CD-R/RW drive

For more information, refer to Chapter 4, Operating Basics.

Problem	Procedure
You cannot access a	Make sure the drive’s disc tray is securely
CD/DVD in the drive	closed. Press gently until it clicks into place.
	Open the disc tray and make sure the CD/DVD is
	properly seated. It should lie flat with the label
	facing up.
	A foreign object in the disc tray could block laser
	light from reading the CD/DVD. Make sure there
	is no obstruction. Remove any foreign object.
	Check whether the CD/DVD is dirty. If it is, wipe it
	with a clean cloth dipped in water or a neutral
	cleaner. Refer to the Media care section in
	Chapter 4, for details on cleaning.
Some CD/DVDs run	The software or hardware configuration may be
correctly, but others	causing a problem. Make sure the hardware
do not	configuration matches your software’s needs.
	Check the CD/DVD’s documentation.
	Check the type of CD/DVD you are using.
	The drive supports:
	DVD-ROM:	DVD-ROM, DVD-Video
	CD-ROM:	CD-DA, CD-Text, Photo CD™
		(single/multi-session),
		CD-ROM Mode 1, Mode 2,
		CD-ROM XA Mode 2

(Form1, Form2),

Enhanced CD (CD-EXTRA),

Addressing Method 2

Recordable CD: CD-R, CD-RW

Check the region code on the DVD. It must match that on the DVD-ROM&CD-R/RW drive. Region codes are listed in the Optical disc drives section in Chapter 2, The Grand Tour.

8-10 User’s Manual