Toshiba A9, Pro S200, SATELLITE PRO A150, TECRA S5 call, Modem, modem, session, function, during a, protocol, directions, Communication, communication, Restart Windows, becomes garbled, remote computer

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

i.LINK (IEEE1394) device

Problem	Procedure
i.LINK device does not	Make sure the cable is securely connected to the
function	computer and to the device.
	Make sure the device’s power is turned on.
	Reinstall the drivers. Open the Windows
	Control Panel and double-click the Add
	Hardware icon. Follow the on-screen
	directions.
	Restart Windows.
	If problems persist, contact your dealer.

Modem

Problem	Procedure
Communication	Make sure the computer’s internal modem
software can’t initialize	settings are correct. Refer to Phone and Modem
modem	Properties in the Control Panel.
You can hear a dial	If the call is going through a PBX machine, make
tone but can’t make a	sure the communication application’s tone dial
call	detection feature is disabled.
	You can also use the ATX command.

You place a call, but a connection can’t be made

Make sure the settings are correct in your communications application.

After making a call you can’t hear a ring

Make sure the tone or pulse selection in your communications application is set correctly.

You can also use the ATD command.

Communication is cut	The computer will automatically cut off
off unexpectedly	communication when connection with the carrier
	is not successful for a set time interval. Try
	lengthening this time interval.
A CONNECT display is	Check the error control setting in your
quickly replaced by NO	communications application.
CARRIER	You can also use the AT\N command.
Character display	In data transmission, make sure the parity bit and
becomes garbled	stop bit settings correspond with those of the
during a	remote computer.
communication	Check the flow control and communication
session
	protocol.

User’s Manual 8-21