TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Some CD/DVDs run

The software or hardware configuration may be

correctly, but others

causing a problem. Make sure the hardware

do not

configuration matches your software’s needs.

 

Check the CD/DVD’s documentation.

 

 

 

Check the type of CD/DVD you are using. The

 

drive supports:

 

DVD-ROM:

DVD-ROM, DVD-Video

 

CD-ROM:

CD-DA, CD-Text, Photo CD™

 

 

(single/multi-session), CD-ROM

 

 

Mode 1, Mode 2, CD-ROM XA

Mode 2 (Form1, Form2),

Enhanced CD (CD-EXTRA),

Addressing Method 2

Recordable DVD: DVD-R/-R DL, DVD+R/+R DL,

DVD-RW, DVD+RW, DVD-RAM

Check the region code on the DVD. It must match that on the DVD Super Multi drive. Region codes are listed in the Optical disc drives section in Chapter 2, The Grand Tour.

USB floppy diskette drive

For further information, please refer to Chapter 3, Hardware, Utilities and Options.

Problem

Procedure

Drive does not operate

Check the connection between the computer and

 

the drive to ensure that it is properly attached.

 

 

Some programs run

The computer’s software or hardware

correctly but others

configuration may be causing a problem - ensure

do not

that these configurations match your

 

requirements (refer to any relevant

 

documentation, for example that supplied with

 

any software in use, for further information).

 

 

You cannot access the

Try another floppy diskette in the drive - if you are

external floppy diskette

able to access this disk then it indicates the

drive

original disk and not the drive is probably causing

 

the problem.

 

If you are still unable to resolve the problem,

 

contact your reseller, dealer or service provider.

 

 

8-12

User’s Manual