TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Points to note about the Fingerprint Utility software

You are able to backup saved fingerprint data and information within the PasswordBank by using the Import or Export User Data facility under the fingerprint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

The Encrypting File System (EFS) is a Windows Vista™ feature.

If a file is encrypted using EFS, it cannot be encrypted further using the fingerprint authentication function.

If both the fingerprint sensor and Trusted Platform Module (TPM) security are used as identification devices, you must install and configure the Infineon TPM Professional package first before you setup and configure the fingerprint utility. Please refer to the TPM (Trusted Platform Module) Installation Guide for further information on the installation and configuration considerations relating to TPM.

In the Help File, it is stated that this software’s PasswordBank function can be used for managing security relating to the Internet as well as for general applications. However, please be aware that the Internet PasswordBank function within the fingerprint utility provided on this computer can only be used with Microsoft’s Internet Explorer software.

Set Up Procedure

Please use the following procedure when first using fingerprint authentication.

Fingerprint Registration

You should initially enroll the required authentication data using the User Enrollment Wizard.

■In use, the fingerprint authentication system will use the same username and password as defined within the Windows operating system. If no Windows password has been configured, you must do this before starting the fingerprint registration process.

■Up to twenty-one fingerprint patterns can be registered on this sensor.

1.To run this program, click Start ->All Programs ->Protector Suite QL ->User Enrollment.

You are also able to start the User Enrollment Wizard by using the following methods.

■Click the Protector Suite QL icon in the Task Bar.

■Swipe your finger across the Fingerprint Sensor.

2.Click Next.

User’s Manual

4-7