1. OUTLINE EO18-33025
1.5 Supply Specifications
1-9
1.5 Supply Specifications1.5.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
Unit: mm (inch)
Issue mode
Item Batch mode Strip mode Cut mode
c Width including backing paper 25.4 to 112 (1.0 to 4.41)
d Media width 22.4 to 109 (0.88 to 4.29)
203 dpi 10 to 999
(0.39 to 39.3)
25.4 to 152.4
(1.0 to 6)
25.4 to 999
(1.0 to 39.3)
Label
300 dpi 10 to 457.2
(0.39 to 18.0)
25.4 to 152.4
(1.0 to 6)
25.4 to 457.2
(1.0 to 18.0)
203 dpi 10 to 999
(0.39 to 39.3) ----- 25.4 to 999
(1.0 to 39.3)
e Media pitch
Tag
300 dpi 10 to 457.2
(0.39 to 18.0) ----- 25.4 to 457.2
(1.0 to 18.0)
203 dpi 8 to 997
(0.31 to 39.25)
23.4 to 150.4
(0.92 to 5.92)
19.4 to 993
(1.0 to 39.1)
f Media length
300 dpi 8 to 455.2
(0.31 to 17.9)
23.4 to 150.4
(0.92 to 5.92)
19.4 to 451.2
(1.0 to 17.76)
g Gap/black mark length 2.0 to 10.0 (0.08 to 0.39) 6.0 to 10.0
(0.24 to 0.39)
h Black mark width Min. 8.0 (0.31)
Thickness 0.06 to 0.19 (0.0024 to 0.0075)
Max. outer roll diameter Ø127 (5)
Ø214 (8.42): When the optional External Media Roll Hanger is used.
Roll direction Outside (standard), Inside (Refer to NOTE 3)
Inner core diameter 25.4 to 38.1, or 76.2 (1 to 1.5, or 3) (See NOTE 2.)
e
f
c
d
Feed Direction
Black Mark
(on reverse side) Tag paper
Cut position
Black Mark
(on reverse side)