6. SYSTEM MODE
(Revision Date: Mar. 27, 2009)
6.2 ABORT OF LABEL FORMAT AUTO CALL
6.2 ABORT OF LABEL FORMAT AUTO CALL
When the STATUS lamp blinks in orange during the system mode, releasing the [FEED] button aborts a label format auto call.
6.3 PARAMETER CLEAR
When the STATUS lamp lights in orange during the system mode, releasing the [FEED] button performs a Parameter Clear.
Parameter | Initial Setting |
TONE ADJUST | +00 |
FEED ADJUST | +0.0mm |
CUT POSITION ADJUST | +0.0mm |
BACKFEED ADJUST | +0.0mm |
Character Code | |
Zero Font | 0 (without slash) |
Baud Rate | 9600 bps |
Data Length | 8 bits |
Stop Bit | 1 bit |
Parity | None |
Flow Control Code | XON/XOFF + READY / BUSY (DTR) method |
Control Code | Auto |
[FEED] Key Function | FEED |
Euro Font Code | B0H |
X axis Fine Adjustment | 0mm |
Sensor Selection | Feed Gap Sensor |
Print Speed | 203dpi model: 5inch/sec. |
| 300dpi model: 3inch/sec. |
IP Address | 192.168.010.020 |
Subnet Mask | 255.255.255.000 |
Gateway | 000.000.000.000 |
DHCP | Disable |
DHCP Client ID | FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF |
Socket COMM. | Enabled |
Socket COMM. Port | 08000 |
