Toshiba B-EV4 manual Replacing the Ribbon Sensor B-SV4T model only

3. REPLACING THE IMPORTANT PARTS

EO18-33025

(Revision Date: Mar. 27, 2009) 3.10 Replacing the Ribbon Sensor (B-SV4T model only)

3.10Replacing the Ribbon Sensor (B-SV4T model only)

1.Refer to section 3.1 to remove the top cover.

2.Remove the sensor connector from the main PC board.

Main PC Board

Sensor Connector (JP20)

3.Use the Phillips screwdriver to remove the screw from the ribbon sensor.

T-2x4 Screw

Ribbon Sensor

4.Replace the ribbon sensor with a new one, then reassemble in the reverse order of removal.

5.After replacing, make sure the printer performs correctly for the following points.

•Printing is performed correctly and the ribbon is not slack or wrinkled.

•When the ribbon is unloaded and the thermal transfer printing is performed, an error occurs. (The ribbon sensor detects the status correctly.)

3-21