5. MAINTENANCE
5. MAINTENANCE
5. MAINTENANCE
WARNING!
DO NOT USE a spray cleaner containing flammable gas for cleaning this product, as this may cause a fire.
This section presents the clean tools and methods to maintain your printer.
1.Please use one of following material to clean the printer.
• Cotton swab (Head cleaner pen)
•
• Vacuum / Blower brush
• 100% ethanol
2.The cleaning process is described as following
Printer Part | Method |
| 1. Always turn off the printer before |
| cleaning the print head. |
| 2. Allow the print head to cool for a |
| minimum of one minute. |
| 3. Use a cotton swab (Head cleaner |
| pen) and 100% ethanol to clean the |
| print head surface. |
Print Head |
|
| 1. Turn the power off. | |
Platen Roller | 2. Rotate the platen roller and wipe it | |
thoroughly with 100% ethanol and a | ||
| ||
| cotton swab, or | |
Tear Bar/Peel Bar | Use the | |
| ethanol to wipe it. | |
Sensor | Compressed air or vacuum | |
Exterior | Wipe it with | |
Interior | Brush or vacuum |
Interval
Clean the print head when changing a new label roll.
Clean the platen roller when changing a new label roll.
As needed
Monthly
As needed
As needed
