3. REPLACING THE IMPORTANT PARTS
(Revision Date: Mar. 27, 2009)
3.8 Replacing the Feed Button PC Board
3.8Replacing the Feed Button PC Board
1.Refer to section 3.1 to remove the top cover.
2.Remove the screws which fix the feed button PC board and the mylar sheet to the
mechanism. | |
Mylar Sheet
Top Cover
Feed Button PC Board
Mylar Sheet
3.Replace the feed button PC board with a new one, then reassemble in the reverse order of removal.
4.After replacing, make sure the printer performs correctly for the following points.
•When the printer is turned on and then the top cover is opened, the status lamp gets unlit.
•Next, when the top cover is closed, the status lamp lights up in green.
•When the [FEED] button is pressed during the unloading of a media, the status lamp flashes in red.
