Toshiba B-EV4 manual Replacing the Feed Gap Sensor Lower

3. REPLACING THE IMPORTANT PARTS

EO18-33025

(Revision Date: Mar. 27, 2009)

3.12 Replacing the Feed Gap Sensor (Lower)

3.12Replacing the Feed Gap Sensor (Lower)

1.Refer to section 3.1 to remove the top cover.

2.Use the Phillips screwdriver to remove the 2 screws from the mylar sheet.

3.Remove the mylar sheet.

Mylar Sheet

FLT-3x6 Screw

4.Remove the sensor connector from the main PC board.

5.Use the Phillips screwdriver to remove the screw from the sensor plate.

6.Remove the sensor plate.

7.Remove the feed gap sensor (lower).

Main PC

Board

T-1.5x4 Screw

Sensor ConnectorSensor plate (JP29)

Feed Gap Sensor (lower)

8.Replace the feed gap sensor (lower) with a new one, then reassemble in the reverse order of removal.

3-24