3. REPLACING THE IMPORTANT PARTS
(Revision Date: Mar. 27, 2009)
3.6 Replacing the Stepping Motor
5.Replace the stepping motor with a new one, then reassemble in the reverse order of removal. Be sure to apply FLOIL to the gear when reassembling.
LUBRICATION
Gear: FLOIL
NOTE:
Make sure that the stepping motor is mounted in the correct position and the thermal conductive grease is applied to the thermistor to keep good contact with the stepping motor case.
6.After replacing, perform a diagnostic test print or print a sample label to make sure the printer performs correctly for the following points.
•Printing is performed correctly.
•No noise is generated during the print operation.
