Toshiba B-EV4 Detection Area of the Transmissive Sensor, Detection Area of the Reflective Sensor

1. OUTLINE

NOTES:

EO18-33025

1.5 Supply Specifications

1.To ensure print quality and print head life use only TOSHIBA TEC approved media.

2.When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the optional External Media Roll Hanger is required.

3.Precaution for use of labels

When labels are used for printing, please only use outside wound labels. Use of an inside wound label causes a paper jam.

	Outside wound	Inside wound
Label	Usable	Not usable
Tag Paper	Usable	Usable

1.5.2 Detection Area of the Transmissive Sensor

The Transmissive sensor is fixed and positioned at 6.35 mm right of the center of the media path. The Transmissive Sensor detects a gap between labels, as illustrated below.

	Area to be detected.
Sensor position
		Label
Min. 2 mm		Gap
(Min. 6 mm:		Label
cut mode)
	Min. 8 mm

Sensor position

Print side

Media feed direction

6.35mm

1.5.3 Detection Area of the Reflective Sensor

The figure below illustrates the relation between the head effective print width and media width. (for GS14 Type)

Out of print range		Print head element		Out of print range
	2 mm	108.0 mm±0.2mm	2 mm
		(Head Effective Print Range)

112.0 mm (Max. media width)

(for TS14 Type)

Out of print range

3 mm

Out of print range

Print head element
106.0 mm±0.2mm	3 mm
(Head Effective Print Range)

112.0 mm (Max. media width)

1-10