Toshiba D-VR610KU Press Pause II to pause recording, Press Pause II or REC e again to restart

Press [REC el to start recording.	7	Press [STOP . l to stop recording.
6 "e" will be displayed for 5 seconds.		The recorded title will be included in the title list.
		(Refer to "Guide to a Title List" on page 70.)

•	IWalt for a moment 1•• -- ••• _ --190%	I
Press [PAUSE II] to pause recording.
Press [PAUSE II] or [REC e] again to restart	This operation may take
recording.
	awhile to be completed.

To set one-touch timer recording (OTR)•••

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC e] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start.

I • 030==l-~

/0:30""

(normal recording) , :00

\)

8:00 7:30

'--...-/

•To change the recording length during one-touch timer recording, press [REC e] repeatedly until the desired length appears.

•To cancel one-touch timer recording within the specified time, press [STOP .].

Note

•When you press [REC e], recording starts immediately and continues until the disc is full or you stop recording.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•You cannot change the recording mode during the recording pause mode.

Note for ope-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the follOWing operations during one-touch timer recording.

-Turning off the power (One-touch timer recording will be canceled.).

-Using [REC e] or [STOP.] on the remote control.

•You cann,ot use the pause function during one-touch timer recording.

•If DVD one-t()uch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

•When ohe-tom:h timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

EN 37