Toshiba D-VR610KU manual 24 EN, Audio OUT

•When you change the connections, all devices should be turned off.

•Refer to the owner'smanual accompanying external devices for more information.

2 Channel Analog Audio Connection	Digital Audio Connection
stereo system	Dolby Digital decoder
	COAXIAL

analog audio input jacks

RCA audio cable

ova

DlGlTAL

AlJOlOOUT

digital audio coaxial input jack

digital audio coaxial cable

	COAXIAL
AUDIO OUT	DIGITAL AUDIO OUT

*MD deck or DAT deck can be also connected through coaxial jack.

S	r d bl	d' th'	ct'	f II		.
• RCA audio cable (LlR) x 1			_
Please purchase the rest of the necessary cables at your local store.
			Multi Channel Digital Audio Setting
					Setup >General Setting >Playback >Audio Out>
					Dolby Digital
If output is Dolby Digital encoded audio, connect to					Stream	OFF
a Dolby Digital decoder.
If output is DTS encoded audio, connect to a DTS					PCM	ON
decoder.
If output is encoded audio for both Dolby Digital and
DTS, connect to the decoder which encodes multiple					Stream	ON
audio sources.
Connecting to an MD deck or DAT deck.					PCM	OFF
If not connected to any external devices.					PCM	OFF
* To complete these settings, refer to page 89.

Note

•The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.

•The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•By connecting this unit to a Dolby Digital decoder, you can enjoy high~qualityP9lbyDigitalmurtfchanrel ·w

surround sound as heard in the movie theaters. . " '. , - " .• ~;, ~

•By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the original sound as truthfully as possible. Multi-channel Surround System is developed bythe DTS,lnc.

•Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

24 EN