Toshiba G8000 Series installation manual Anchor bolts, Anchor bolt tightening

10.3 Anchor bolts

Tighten the anchor bolts to secure the UPS on the floor. Tightening detail is shown in Figure 10.2.

Anchor bolts of 12mm (1/2”) diameter are to be used, clearance holes of 16mm (5/8”) diameter are provided in the UPS base.

4 of 16mm-diameter	4 screw holes
(5/8”) screw holes	(Side View)

Figure 10.2 -

Anchor bolt tightening

Anchor Bolt

< 100~225kVA >

Back

4x 12mm-Dia.(1/2”)

Front

	< 250/300kVA >
550mm	8 x 12mm-Dia.(1/2”)
(21” 21/32)

650mm

(25” 19/32)

100/125kVA: 1,050mm (41” 11/32)
150/180/225kVA: 1,170mm (46” 1/16)	575mm	564mm	575mm
	(22” 5/8)	(22” 3/16)	(22” 5/8)

Figure 10.3 - Hole locations and dimensions for anchor bolts.

26