Toshiba GA-1121 manual Color Calibration

22-26

Color Calibration

If you chose the ColorCal method, an alert message appears, asking if you want to calibrate the copier/printer’s scanner.

10.If you are using ColorCal and want to calibrate the scanner, click Yes.

11.Choose the Input Tray to use for the scanner measurement page and click Print. Retrieve the scanner measurement page from the copier/printer.

12.Place the Kodak Gray Scale strip, Kodak Color Control Patches strip, and scanner measurement page in the correct positions on the copier glass for scanner calibration.

Place the Gray Scale strip face down on the copier/printer glass so that it will be centered along the top edge of the scanner measurement page. Then place the Color Scale strip face down on the copier glass so it is centered below the Gray Scale strip. Finally, place the scanner measurement page (second one printed) face down over the strips.

13.To perform the scanner calibration, click Continue in the ColorCal dialog box that appears.

After the scanner has been calibrated, another dialog box appears, prompting you to calibrate the GA-1121.

14. Click Measure in the AutoCal or ColorCal Get Measurements pane.