Toshiba DKT, IPT manual Storing a System/Station Speed Dial Number, To access the SD directories

Advanced Operation

Storing a System/Station Speed Dial Number

Accessing System SD and Personal SD Directories

Names can be assigned to System and Station (personal) Speed Dial numbers. These directories appear on large screen (DKT3014-SDL) telephones only.

➤To access the SD directories

1.Press the Soft Key next to SYSTEM SD or PERSONAL SD to view the first screen.

2.Press the MORE Soft Key to view following pages; press PREVIOUS to page back.

3.To dial from the list, press the Soft Key next to the name. The system calls the number assigned to the name and displays the dialed number.

4.To assign names to your Personal (Station) SD numbers, see “Storing Personal Speed Dial Names” on page 66.

Storing a System/Station Speed Dial Number

1.Dial ￿￿￿. The display shows “SPEED DIAL” and you hear Entry Tone.

2.Dial the Station Speed Dial number (100~199) or System Speed Dial number (200~999). The LCD shows your digits and you hear Entry Tone.

3.Dial the telephone number to be stored + ￿. Include any required access and area codes. The LCD shows “SPEED DIAL” + the Speed Dial Number + destination + #. You hear Success Tone.

4.Release the telephone. To enter another number, repeat the process, starting with Step 1. Refer to Table 6 below.

Example: To store a Station Speed Dial number on Index 100, dial ￿￿￿￿+￿￿￿￿ +

￿￿￿￿￿￿￿￿￿￿￿ + ￿

Table 6	Feature Access Codes
Feature		Feature Access Code Sequences
Speed Dial (Storing an SD number)
Station1		+	+ Phone No.2 +
		nnn = 100~199 SD bin numbers
1		￿￿￿+ QQQ+ Phone No.2 + ￿
System		nnn = 200~999 SD bin numbers

1.Stations must be assigned/enabled Speed Dial capabilities in system programming by an Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).

2.Refer to Table 7 on page 54 to see how to enter￿and ￿into a speed dial phone number.

Strata CTX DKT/IPT Telephone 10/03 53