Advanced Operation
Distinctive Ringing
Distinctive Ringing
➤To set distinctive ringing (CTX software R1.2 or lower)
1.Press to enter User Programming Mode.
2.Press a /LQH button. The Line LED is steady green.
3.Enter the ringing pitch number:
= Low, = Middle, = High, = Combination
4.Lift the handsetto return to idle.
➤To set distinctive ringing (CTX software R1.3 or higher)
1.Press to enter User Programming Mode.
2.Press a /LQH or extension button. The LED is steady green.
3.You can press +ROG to switch between internal and external pitch. (Internal = station calls within your system; external = outside line calls.)
4.Enter the
5.Press the same button that you pressed in Step 2 (/LQH or extension). Two beeps is a confirmation tone and “DATA PROGRAMMED” displays on your LCD.
Table 4 | Internal and External Call Ringing Tones | ||
|
|
| |
| Tone No. | Frequency and Cadence | |
| 01 |
| 500 Hz 1 sec. On, 3 sec. Off, repeat |
| 02 |
| 1300 Hz 1 sec. On, 1 sec. Off, repeat |
|
|
|
|
| 11 |
| 500/640 Hz 1 sec. On, 3 sec. Off, repeat |
|
|
|
|
| 12 |
| 500/640 Hz 1 sec. On, 1 sec. Off, repeat |
| 13 |
| 860/1180 Hz 1 sec. On, 3 sec. Off, repeat |
|
|
|
|
| 14 |
| 860/1180 Hz 1 sec. On, 1 sec. Off, repeat |
|
|
|
|
| 15 |
| 1300/1780 Hz 1 sec. On, 3 sec. Off, repeat |
| 16 |
| 1300/1780 Hz 1 sec. On, 1 sec. Off, repeat |
|
|
|
|
| 17 |
| 860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3 sec. Off, repeat |
|
|
|
|
| 18 |
| 860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1 sec. Off, repeat |
40 | Strata CTX DKT/IPT Telephone 10/03 |
