Toshiba C675, Pro C470D, Pro L770D, L775D Using Corel Digital Studio for Toshiba, Data Verification

If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL disc that you have already recorded to, you might not be able to read the added data under some circumstances. For example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Service Pack 6 or later, and in Windows 2000, you will need Service Pack 2. In addition to this, some DVD-ROM and DVD-ROM / CD-R/RW drives cannot read this added data regardless of the operating system.

TOSHIBA Disc Creator does not support recording to DVD-RAM discs

-to achieve this you should use Windows Explorer or another similar utility.

When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.

When you back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW disc, be sure to use the same type of disc.

You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Click Start -> All Programs -> TOSHIBA -> CD&DVD Applications - > Disc Creator to access the TOSHIBA Disc Creator utility.

2.Display the setting dialog box by one of the following two steps:

Click the Recording settings button ( ) for writing on the main toolbar in the Data CD/DVD mode.

Select Settings for Each Mode -> Data CD/DVD in the Settings menu.

3.Mark the Verify Written Data check box.

4.Select File Open or Full Compare mode.

5.Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

Using Corel Digital Studio for TOSHIBA

This feature is supported with some models.

How to make a Labelflash DVD

Simplified steps for making a Labelflash DVD:

User's Manual 3-13