Use a point size 1 Phillips screwdriver to remove and fasten the screw - the use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required).
2.Remove the AC adaptor and all cables and peripherals connected to the computer.
3.Close the display panel.
4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 5, Power and
5.Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent them from being lost.
Use a point size 1 Phillips screwdriver.
6.Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-11 Removing the memory module cover (Satellite L770/L775/L770D/
L775D/satellite Pro L770/L775/L770D/L775D)
2
1
1. Screw | 2. Memory module cover |
User's Manual |
