Toshiba PSAGDX, PSAGFX, PSAGBX, PSAGAX, PSAGQX Replacement Procedures HDD, Removing the HDD chassis

4 Replacement Procedures 4.2 HDD

4.Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows.

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.

5.Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5 black flat head screws.

6.Place the HDD pack on a flat surface (such as a desk), and remove the chassis.

M3x3.5 black flat- head screw

Main HDD chassis

Main HDD

M3x3.5 black flat-head screw

Figure 4-8 Removing the HDD chassis

CAUTION: Do not apply pressure to the top or bottom of the drive.

4-16 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual