Toshiba PSAGCX, PSAGFX, PSAGBX, PSAGAX, PSAGQX, PSAGRX, PSAGVX, PSAG9X Quick Start Diagnostic Programs

3.2 Quick Start 3 Diagnostic Programs

‹Script File Name: Script file name, e.g. ‘Custom.INI’ in the above screen;

‹Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-02-16 00:42:40’ in the above screen;

‹Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining test time at the same location as Current TIME (C. TIME) in the above screen;

‹Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number planning to execute and the current LOOP number have been finished, e.g. ‘COUNT: 01/01’ in the above screen;

‹CPU Temperature: Detect the temperature in the current CPU, e.g. ‘CPU: 56C’ in the above screen;

‹Remaining Battery Capacity: Remaining Battery Capacity detected in the current Battery, e.g. ‘BAT: 46%’;

‹Test Order: Define the test sequence. There is two sequence modes: Sequential Test Mode and Random Test Mode. The default mode is Sequential Test Mode, it would displays ‘ORDER: SEQ’ as in the above screen;

‹LOG File Name: Display the file name of the test log, e.g. Custom.Log in the above screen;

‹Start Test Time (S.TIME): Display the test start time for the current test item or the test script, e.g. ‘S.TIME: 2008-02-16 00:42:28’ in the above screen;

‹Break On Error: Display ‘HALT’ as shown in the above screen when ‘Break On Error’ is enabled;

‹Wait On Error: Display ‘WAIT’ as shown in the above screen when ‘Wait On Error’ is enabled;

‹Pause Enable: Display ‘PAUSE’ when “Pause Enable” is enabled;

‹Manual Interrupt Method: Display ‘Esc: Break’ to tell the user how to manually interrupt the test process.

Satellite A300,Satellite Pro A300, EQUIUM A300,SATEGO A300 Maintenance Manual 15