Toshiba PSAGCX, PSAGFX, PSAGBX, PSAGAX, PSAGQX Disassembling the ODD Drive, Assembling the ODD Drive

4 Replacement Procedures 4.3 ODD Bay Module

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails.

Disassemble the ODD drive according to the following procedures and Figure 4-13.

1.Remove two M2x4 black flat head screws.

2.Remove the bracket.

Odd bay module

Bracket

M2x4 black flathead screw

Figure 4-13 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figure 4-13. 1. Seat the bracket and secure it with two M2x4 black flat head screws.

4-22 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual