Toshiba PSAGBX, PSAGFX, PSAGAX, PSAGQX, PSAGRX, PSAGCX, PSAGVX, PSAG9X, PSAGUX Removing the HDD chassis

4 Replacement Procedures 4.2 HDD

4.Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows.

NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.

5.Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5 black flat head screws.

6.Place the HDD pack on a flat surface (such as a desk), and remove the chassis.

M3x3.5 black flat-head screw

Second HDD chassis

M2x3 black flat-head screw

Second HDD

M3x3.5 black flat-head screw

Figure 4-11 Removing the HDD chassis

CAUTION: Do not apply pressure to the top or bottom of the drive.

4-18 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual