Toshiba PSAG9X, PSAGFX Display Assembly Replacement Procedures, Removing the Display Assembly

4.10 Display Assembly 4 Replacement Procedures

4.10 Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer.

Remove the display assembly according to the following procedures and Figures 4-22.

1.Disconnect the LCD/FL cable from CN6, Microphone cable connector from CN10 and Camera cable connector from CN5 on the system board.

2.Remove four M2.5x3.5 white flat head screws securing the LCD module to the top cover.

3.Remove the wireless antenna cables from the top cover.

4.Remove the display module.

CAUTION: LCM module hinge cannot be disassembled.

M2. 5x3. 5 white flat screw

CN5

CN6

CN10

Figure 4-22 Removing the display assembly

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-35