4 Replacement Procedures

4.5 Wireless Lan Card

4.5 Wireless LAN Card

Removing the Wireless LAN Card

Remove the wireless LAN card according to the following procedures and Figure 4-16.

CAUTION: Do not touch the connectors on the wireless LAN card and in the computer with your bare hands. Wireless LAN cards can fail if they are contaminated with sweat, natural oils, etc. from your hands.

1.Disconnect the three antenna cables with tweezers.

2.Remove the two M2x2 black flat head screws securing the wireless LAN card.

3.Pull the wireless LAN card up and out at an angle.

M2x2 black flat-head screw

Wireless LAN card

Black wire

Gray wire

White wire

Figure 4-16 Removing the wireless LAN card

4-26

Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual

Page 163
Image 163
Toshiba PSAGEX, PSAGFX, PSAGBX, PSAGAX, PSAGQX Replacement Procedures Wireless Lan Card, Removing the Wireless LAN Card