Toshiba PSAGQX, PSAGFX Replacement Procedures ODD Bay Module, Removing the ODD Bay Module

4 Replacement Procedures 4.3 ODD Bay Module

4.3ODD Bay Module

Removing the ODD Bay Module

NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules.

Remove the ODD bay module according to the following procedures and Figures 4-12.

1.Turn the computer upside down.

2.Remove the M2x5 white flat head screw.

3.Push out on the ODD bay module in the direction of the arrow.

CAUTION: Before removing ODD bay module, please remove HDD first to avoid ODD shell.

CAUTION: Handle the ODD bay module carefully it can become hot during operation.

M2x5 white flat- head screw

ODD bay module

Figure 4-12 Removing the ODD bay module

4-20 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual