4 Replacement Procedures 4.1 General
Removing the Battery Pack
Remove the battery pack according to the following procedures and Figure 4-1, 4-2.
CAUTION: When handling the battery packs, use care not to short circuit the
terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up
their casing.
1. Turn the computer upside down so that the back is facing you.
2. Slide out the battery lock.
3. Slide the battery release latch and remove the battery pack from the computer.
Battery release latch Battery pack Battery lock
Figure 4-1 Removing the battery pack
Battery pack
Figure 4-2Removing the battery pack
NOTE: Dispose of the used battery packs as required by local ordinances or
regulations.
4-8 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual