Toshiba PSAGVX LCD Modules, Replacement Procedures LCD Module, Removing the 15.1-inch LCD module

4 Replacement Procedures 4.17 LCD Module

4.17 LCD Modules

NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module.

NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations.

NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from the module.

Removing the 15.1-inch LCD module

Remove the 15.1-inch LCD module according to the following procedures and Figures 4- 36, 4-37.

1.Remove four M2.5x4.5 white flat head screws on the LCD top cover.

2.Remove the LCD module.

3.Carefully tilt the LCD module toward you.

4.Remove four M2x3 black flat head screws on each side securing the LCD bracket.

5.Remove the LCD brackets.

6.Turn the LCD upside down. Be sure to place it on a cushioned surface such as a foam pad.

7.Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable.

4-56 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A3000 Maintenance Manual